Needle detector is a ferromagnetic metal induction instrument, mainly used to detect broken needles in textiles, which is very common in clothing, shoes and hats industry. Today, Shanan Technology mainly talks about the moving method and placement requirements of the needle detector.
0010010 nbsp;
Needle detector moving method:
1 Method of moving the instrument: Select 4 — 6 men, on both sides of the needle detector at the substation, with both hands starting from the lower end of the wings of the instrument, the whole machine can be moved at will. The conveyor shafts at both ends of the conveyor belt must not be used by hand, otherwise, the conveyor shafts will be damaged, thereby damaging the detection effect.
2. Pushing the instrument method: There are four steering wheels at the bottom of the needle detector. When moving the position on the flat ground, only two people need to stand on both sides of the instrument and move it to the destination by hand. But never collide with other objects.
Needle detector placement requirements:
1 The needle detector cannot be placed in a workshop with high-voltage wires above it to avoid interference from external currents and radio waves.
2 The fluorescent lamp above the position of the needle detector must be more than two meters away from the plane of the instrument, and it is better not to install an electric fan (ceiling fan) on the upper part of the instrument.
0010010 nbsp;