Metal detector installation requirements and alarm handling requirements for metal detector installation

Food metal exploration machine equipment requirements and alarm processing requirements for equipment metal exploration equipment: 0010010 nbsp;

1. The vibration of the belt conveyor should not be too large. If it is too large, it should be equipped with vibration isolation rubber pads or a stand equipment exploration instrument. 00 1 00 1 0 nbsp;

2. There should be no large common power supply around the metal prospecting instrument. If the voltage is unstable, a regulated power supply should be added. 0010010 nbsp;

3. The original guess cannot contain too much slag or iron ore. Food metal exploration machine equipment requirements and alarm handling, if there is slag and iron ore, it is best to place the material after the exploration instrument to prevent false alarms.

4. There should be no iron buckles or nails on the conveyor belt, if any, it should be changed to adhesive head to prevent affecting the use of metal prospecting instruments. Food metal exploration machine equipment requirements and alarm processing machine alarm causes and processing 0010010 nbsp;

1) Alarm reason: 00 1 00 1 0 nbsp;

1. Poorly frozen product or externally infected with water; 00 1 00 1 0 nbsp;

2. Metal impurities in the product; 0010010 nbsp;

3. Metal impurities in packaging materials; 0010010 nbsp;

4. The machine is subject to vibration or electromagnetic disturbance; 0010010 nbsp;

2) Alarm product processing 0010010 nbsp;

1. After the explorer alarms, repeat the detection in the same direction {{{1}} times, if {{{1}}}, it can pass without alarm; there are any {{ 0}} Alarms cannot flow into the next process;

0010010 nbsp; 2. After all, products that have not passed the metal detection should be marked with a significant symbol and re-frozen. After the end, the metal detection will be conducted again immediately. Qualified products; assuming that there is still an alarm, it is judged that there are metal impurities, immediately add eye-catching signs, blocking treatment; 0010010 nbsp;

3. The quality inspector is responsible for freezing and inspecting the products that are judged to have metal impurities; 0010010 nbsp;

4. The quality inspector is responsible for pasting the metal fragments on the gold exploration record table and ascertaining its origin; 0010010 nbsp;

5. Once metal impurities are found in the product, the detection time, product, metal species and quantity should be recorded in the gold exploration record table; 0010010 nbsp;