Checking and sorting scale maintenance method:
1. Clean the scale body
Turn off the power and unplug the power cord. Wet the gauze and wring it well, then dip it in a little neutral cleaning solution to clean the weighing pan, display filter and other parts of the scale body.
Note: Do not use any chemical solvents for cleaning. During the cleaning process, avoid splashing water into the scale body. If you accidentally splash into the scale body, you must wait for the water to dry before turning on the power, otherwise it may cause electric shock Or damage the equipment.
2. Level correction
Check whether the scale body is normal. If there is a tilt, adjust the scale feet so that the blisters are placed in the center.
3. Clean the printer
Turn off the power, open the plastic door on the right side of the scale body, hold the plum blossom handle on the outside of the printer, and drag the printer out of the scale body. Press the spring head on the front of the printer, loosen the print head, and gently wipe the print head with the special print head cleaning pen included in the scale attachment to remove the dirt on the top. Wait for two minutes, after the cleaning liquid on the print head has fully evaporated, close the print head, push the printer back into the scale body, close the plastic door, and power on the test. After printing is clear, it can be used normally.
Note: You must use the cleaning pen that comes with the scale to clean the print head. If you have finished using the cleaning solution in the cleaning pen, you can find some clean soft cloth and wipe it with a little absolute alcohol. The automatic weighing machine is strictly forbidden to use other cleaning fluids or wipe the print head with hard objects, otherwise the print head will be damaged.
The automatic weighing machine has the functions of zero tracking and power-on clearing. The power-on removes foreign objects on the weighing pan to ensure that the scale can be used when there is no wind around. Return the scale to zero.
During the weighing process, the automatic weighing machine should ensure that no foreign objects around the scale touch the sensor, and the bottom of the sensor should also be clean and free of foreign objects, otherwise it may cause problems such as inaccurate weighing.